A&S Conveyor Belts Co, Ltd
Home Products Selling Leads Buying Leads About Us
 
A&S Conveyor Belts Co, Ltd

2nd Floor,Xinhe Linghang building,Xingsheng Road,Gaoxing District,Chengdu ,ChengduCity,Sichuan Province.China (Mainland)

610041

86-28-66960589

86-28-66960589



 
∷Products Instruction

Dornor Conveyors 7400 Series Z-Frame Conveyors

Dornor Conveyors 7400 Series Z-Frame Conveyors
Quantity:  
Packaging:  
Effective Period:  14
  Company Info
  Date Joined: 2007
  Country/Territory: China (Mainland)
  Business Type: rading Company
  Number of Employees: 51 - 100 People
 
Detailed Product Description
Dornor Conveyors 7400 Series Z-Frame Conveyors
Specifications

Loads up to 20 lbs/square foot of belt (90 kg/m2)
Belt Widths: (152 mm) to 24(610 mm)
Section Lengths: 24 (610 mm) to 20 (6.1 m)
Belt speed: 233 ft/min maximum (71 m/min)
5°, 10°, 15° & 30° Fixed Angle Modules standard
Wear strip material is UHMW
Continuous TIG welded 304 stainless steel frame
#4 Polish on all outside surfaces
Bearing material is 400 stainless steel
Bearing lubricant is H1 type FDA lubricant
FDA approved belting and plastic components
Features & Benefits

Frame is designed with no horizontal surfaces for optimum cleaning. Conveyors over 10 (3,048 mm) long consist of multiple sections which are bolted together.
Bearings are mounted in cast stainless steel housings for maximum performance in washdown environments.
Solid UHMW wear strips are easily lifted out of the frame without tools to minimize cleaning time.
The tool-less tip up pulley allows conveyor end to be lifted easily for quick access to inside of conveyor for cleaning.
Conveyor is designed to withstand high pressure (100-1,500 psi) spray and chlorinated solutions.
The return belt supports are segmented plastic slide blocks and are easily removed without tools for effective cleaning.
Drive sprockets are located on a 1.5square stainless steel shaft without fasteners to provide optimum drive strength and cleanability.
Frame cut-outs (optional) are available to allow spraying the inside of the conveyor without lifting the belt.
Nose bar idler ends (optional) are constructed of a machined UHMW bar to provide a 1.5diameter transfer.
The nose bar drive configuration (optional) allows the use of the nose bar transfer on each end of the conveyor for small product transfers.
Belt lifters (optional) raise the belt from the wear strips by simply pulling an external lever for fast access and effective cleaning.

Note: Proper conveyor application, cleaning and sanitation is the responsibility of the end user.
When required Dorner can passivate conveyors or provide most materials in 316 or 316L stainless steel.
Contact us for further information.
Contact Us
A&S Conveyor Belts Co., Ltd
Email: [email protected]
Website: www.as-belts.com
Tel: +86-28-66960589
Fax: +86-28-86129221
Send a message directly to this member
sonhoo corporation
 
∷Other Products
 
∷Related Other Products more.
 
 
 Want your products here?